EXTERNAL COMPONENT OPERATIONS
ENGLISH
Portable MD player, etc.
AUX input
Playing an external component
You can connect two external components to this unit.
Connect one to the CD changer jack on the rear using the Line Input Adaptor
Preparations:
•For connecting the Line Input Adaptor
•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to use – EXT IN” on page 28.)
•If the input level of the external component connected to the AUX jack is not high enough, increase the input level properly. (See “To adjust the auxiliary input level – AUX ADJ” on page 28.)
1 Select the external component (LINE IN or AUX IN).
To select “LINE IN” (component connected to the CD changer jack on
the rear), press CD CD-CH (AUX)
repeatedly.
CD
LINE IN
•If “LINE IN” does not appear on the display, see page 28 and select the external input (“LINE IN”).
•Displayed only when one of the following sources is selected – FM, AM and CD.
To select “AUX IN” (component connected to the AUX jack on the control panel), press and
hold CD CD-CH (AUX).
2 Turn on the connected component and start playing the source.
3 Adjust the volume.
4 Adjust the sound characteristics you want. (See pages 22 – 24.)
Note on
When you press CD
32