3 Tune in to a station you want while “Manual Search” is flashing.
To tune in to stations of higher frequencies
To tune in to stations of lower frequencies
•If you release your finger from the button, the manual mode automatically turns off after about 5 seconds.
•If you hold down the button, the frequency keeps changing (in 200 kHz intervals for FM and 10 kHz for AM) until you release the button.
Set the FM reception mode to “Mono On.”
1Press M MODE while listening to an FM stereo broadcast.
“Mode” appears on the display. The
2Press number button 1 to select “Mono On” while “Mode” is still on the display.
Each time you press the button, “Mono On” or “Mono Off” appears alternately.
ENGLISH
If the sound quality decreases and the stereo effect is lost while listening to an FM station
In some areas, adjacent stations may interfere with each other. If this interference occurs, this unit can automatically reduce this interference noise (the initial setting when shipped from the factory). However, in this case, the sound quality will be degraded and the stereo effect will also be lost.
If you do not want to degrade the sound quality and to lose the stereo effect, rather than to eliminate the interference noise, see “To change the FM tuner
After about 5 seconds
The display returns to the source indication screen.
MONO indicator appears.
The sound you hear becomes monaural but the reception will be improved.
11