What is ImageLink?

When an MP3 or a WMA folder includes an image <jml> file edited by Image Converter (supplied in the CD-ROM), you can show the image on the display while the tracks in the folder are played back.

•While reading an image <jml> file, no sounds come out (“Image Link” is shown on the display during this period).

Album 1

Music001.mp3

(Folder 1)

Music002.mp3

 

 

Music003.mp3

 

Photo1.jml

Album 2

Music004.wma

(Folder 2)

Music005.mp3

 

 

Music006.wma

 

Photo2.jml

 

Photo3.jml

Display window

Display window

Photo1.jmlPhoto2.jml

If there are more than one <jml> file in a folder, a <jml> file with younger playback order number will be shown on the display (in the above example, “Photo2.jml” will be used for Album 2).

To activate ImageLink, follow the procedure below:

•See also “Changing the general settings (PSM)” on page 36.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Press number button 1 to select “MOVIE”— Movie category of the PSM settings.

The “Graphics” setting screen appears on the display.

3Turn the control dial to select “ImageLink.”

4Press SEL (select) to finish the setting. ImageLink starts functioning when the next folder starts playing.

Note:

ImageLink will not work in the following cases:

•If no <jml> file is included in an MP3/WMA folder.

•If Intro Scan is activated.

•If the source is changed to any other than “CD,” or

•If you turn off then on the unit while “Image Link” is shown on the display.

ENGLISH

17