ENGLISH

Creating your own color—User

You can create your own colors—“Day” and “Night,” and select them as the display color for any desired source.

• Day: Can be used as your user color during the day time*.

•Night: Can be used as your user color during the night time*.

*Depends on the “Dimmer” setting.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See pages 36 and 37.)

The next-step-operation

buttons start flashing.

2 Press number button 6 to select “COLOR”—Color category of the PSM settings.

3 Select “User” as a color.

The user color will be applied to the currently selected source (the one shown on the upper portion of the display. In this example “All SRC”).

To select which source to apply your user color to, select the target source first by pressing 5 (up) or ∞ (down), before selecting “User” in this step.

4 Select the user color adjustment screen.

One of the user color adjustment screens appears.

“User Day” or “User Night” is shown on the left side of the display.

5 Select “Day” or “Night” which you want to make an adjustment for.

6 Adjust the selected user color.

1)Press ¢ or 4 to select one of three primary colors—“R” (red), “G” (green), and “B” (blue).

2)Press 5 (up) or ∞ (down) to adjust the selected primary color.

You can adjust within the range of 00 to 11.

3)Repeat steps 1) and 2) to adjust the other primary colors.

7 Repeat steps 5 and 6 to adjust the other user colors—“Day” or “Night.”

8 Finish the setting.

42