JVC GET0260-015A Sound adjustments, Adjusting the sound, For Preset values, Indication Range

Sound adjustments

Selecting preset sound modes	2
(C-EQ: custom equalizer)

You can select a preset sound mode suitable to the music genre.

~

Ÿ

Indication	For:	Preset values
		BAS*1	TRE*2	LOUD*3
USER	(Flat sound)	00	00	OFF
ROCK	Rock or	+03	+01	ON
	disco music
CLASSIC	Classical	+01	–02	OFF
	music
POPS	Light music	+04	+01	OFF
HIP HOP	Funk or rap	+02	00	ON
	music
JAZZ	Jazz music	+02	+03	OFF

*1 BAS: Bass; *2 TRE: Treble;

*3 LOUD: Loudness

Adjusting the sound

You can adjust the sound characteristics to your preference.

1

Indication pattern changes as you adjust the level.

Ex.: When “TRE” is selected

Indication	Range
BAS*4 (bass)	–06 (min.) to
Adjust the bass.	+06 (max.)
TRE*4 (treble)	–06 (min.) to
Adjust the treble.	+06 (max.)
FAD*5 (fader)	R06 (Rear only)
Adjust the front and rear	to
speaker balance.	F06 (Front only)
BAL (balance)	L06 (Left only)
Adjust the left and right	to
speaker balance.	R06 (Right only)
LOUD*4 (loudness)	LOUD ON
Boost low and high
frequencies to produce a	LOUD OFF
well-balanced sound at low
volume level.
VOL*6 (volume)	00 (min.) to
Adjust the volume.	30 or 50 (max.)*7

*4 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including “USER.”

*5 If you are using a two-speaker system, set the fader level to “00.”

*6 Normally the +/– buttons work as the volume control. So you do not have to select “VOL” to adjust the volume level.

*7 Depending on the amplifier gain control setting. (See page 17 for details.)

15