PICTURE ADJ. (Picture adjustment): See page 16.
CONTRAST | Adjusts the contrast of the picture. |
BRIGHT | Adjusts the brightness of the picture. |
CHROMA*1 | Adjusts the color density of the picture. |
PHASE*2 | Adjusts the color phase. |
SHARPNESS | Adjusts the outlines of the picture. |
sub menu | Displays the fine adjustment bar. |
reset | Resets the Picture Adjustment Menu settings to defaults. |
SIZE/POSITION ADJ. : See page 17.
H.SIZE | Adjusts the horizontal screen size. |
H. POSITION | Adjusts the horizontal screen position. |
V. SIZE | Adjusts the vertical screen size. |
V.POSITION | Adjusts the vertical screen position. |
DOT CLOCK*3 | Adjusts to eliminate stripes or flickering. Use with “CLOCK PHASE.” |
| Normally, no adjustment is needed. |
CLOCK PHASE*3 | Adjusts to eliminate stripes or flickering. Use with “DOT CLOCK.” |
| Normally, no adjustment is needed. |
sub menu | Displays the fine adjustment bar. |
reset | Resets Size/position Adjustment Menu settings to defaults. |
FUNCTION SELECT: See pages 19 to 23.
COLOR TEMP. | Adjusts the color temperature. |
| Use when the picture is reddish or bluish. |
ASPECT*4 | Selects the horizontal to vertical ratio of the screen. |
SIGNAL MODE*5 | • Selects a color system (NTSC, PAL, SECAM, NTSC 4.43, PAL60) when VIDEO A or VIDEO B |
| input is selected. |
| • Selects a scan |
| selected. Normally, set to “AUTO. |
”RGB/COMPO.*6 | Selects the usage of the COMPONENT/RGB B terminals either as the COMPONENT input |
| terminal or as the RGB B input terminal. |
SYNC TERM.*7 | Adjusts the resistance of RGB B input terminals. |
reset | Resets the Function Selection Menu settings to defaults. |
*1 Adjustable when viewing the NTSC, PAL or SECAM signal, or component signal. *2 Adjustable when viewing the NTSC signal or component signal.
*3 Adjustable when RGB A or RGB B input is selected.
*4 Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected.
*5 Not adjustable when viewing the following component
*7 Adjustable when RGB B input is selected.
ENGLISH
35
