JVC GR-AX940 manual Feature Quick Review, To check the end of the last recording

RETAKE (R/F) Button

EN19

FEATURE: Quick Review

PURPOSE:

To check the end of the last recording.

OPERATION:

1)Press “ ” and release quickly during the Record– Standby mode.

■Tape is rewound for about 2 seconds and played back automatically, then pauses in Record–Standby mode for the next shot.

NOTE:
Distortion may occur at the start of playback. This is
normal.
FEATURE: Retake
	RECORDING
1) Make sure the camcorder is in the Record–Standby
PURPOSE:
To re-record certain segments.
OPERATION:
mode.
2) Press either RETAKE to reach the start point for new
recording. Pressing “F” forwards the tape and
pressing “R” reverses it.
3) Press the Recording Start/Stop Button to start
recording.
NOTE:
Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.