JVC GR-AX940 After Use, Cleaning The Camcorder, Clean Lens, Remove Eyepiece, RE-ATTACH Eyepiece

44EN

USERMAINTENANCE

LENS COVER Open/Close Ring

BATTERY RELEASE

Set to “POWER OFF”.

Remove.

PUSHEJECT

NOTES:

After Use

1 Set the Power Switch to “POWER OFF” to turn off the camcorder.

2 Slide EJECT to open the cassette holder, then remove the cassette.

3 Close and lock the cassette holder by pressing PUSH.

4 Slide BATTERY RELEASE to remove the battery pack.

5 Turn the LENS COVER Open/Close Ring to close the lens cover.

Cleaning The Camcorder

1 CLEAN EXTERIOR Wipe gently with a soft cloth.

•Put cloth in diluted mild soap and wring it well to wipe off heavy dirt, then wipe again with a dry cloth.

2 CLEAN LENS

Blow it with a blower brush, then wipe it gently with lens cleaning paper.

3 REMOVE EYEPIECE

Turn the eyepiece counterclockwise and pull it out.

4 CLEAN VIEWFINDER Remove dust using a blower brush.

5 RE-ATTACH EYEPIECE

Re-attach the eyepiece and turn it clockwise.

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mold may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth, refer to the cautions that came with it.

●When removing the eyepiece, be sure to hold the viewfinder securely.