EN15
|
| Shoulder Strap Attachment |
| |
|
| ATTACH STRAP | STARTED | |
|
| 1 Following the illustration at left, thread the strap | ||
1 |
| through the top of the eyelet 1, then fold it back and | ||
| thread it through the buckle 2. Repeat the procedure | |||
| GETTING | |||
| 4 | to attach the other end of the strap to the other eyelet | ||
2 | 3, making sure the strap is not twisted. | |||
| ||||
| ADJUST LENGTH | |||
|
| |||
3 |
| 2 Adjust as shown in the illustration at left 4. |
|
Tripod Mounting
1 ALIGN AND TIGHTEN
Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a
