JVC GR-D22 26 DUBBING, Dubbing To A VCR, To Use This Camcorder As A Player

Dubbing To A VCRTo Use This Camcorder As A Player

1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 15.

2 Set the camcorder’s Power Switch r to “PLAY” while pressing down the Lock Button e located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3 Engage the VCR’s AUX and Record-Pause modes.

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press £/8 6 on the camcorder.

5 Press £/8 6 on the camcorder and engage the VCR’s Record mode.

6 Engage the VCR’s Record-Pause mode and press £/8 6 on the camcorder.

7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

Menu Screen ( pg. 23, 24).

•Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen ( pg. 24).

•Indications other than date/time and time code

..... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in

the Menu Screen ( pg. 23, 24).

EN

6

	To AV &
	Connector
	cover*
To	Audio/Video
S-VIDEO *
	cable
	(provided)
S-Video cable	Yellow to
	VIDEO** IN
(optional)
	Red to
	AUDIO R IN
To	White to
S-VIDEO IN	AUDIO L IN
TV
	VCR

*When connecting the cable, open this cover.

**Connect when an S-Video cable is not used.

26 DUBBING