•During playback of the unrecorded portion,
•The speaker volume is too great.
=Turn the speaker volume down ( pg. 13).
Blocks of noise appear during playback, or there is no playback picture and the screen becomes blue.
=Clean the video heads with an optional cleaning cassette ( pg. 33).
The LCD monitor, the viewfinder and the lenshave become dirty (ex. fingerprints).=Wipe them gently with soft cloth. Wiping strongly can cause damage ( pg. 34).
An unusual mark appears.=Check the section of the manual that explains LCD monitor/viewfinder indications ( pg. 36 – 38).
•The temperature of the battery is extremely high/low.
•Charging is difficult in places subject to extremely high/low temperatures.
=To protect the battery, it is recommended to charge
it in places with a temperature of 10°C to 35°C (50°F to 95°F) ( pg. 32).
When the image is printed from the printer, ablack bar appears at the bottom of the screen.• This is not a malfunction.
=By recording with “DIS” activated ( pg. 22) this can be avoided.
When the camcorder is connected via the DVconnector, the camcorder does not operate.•The DV cable was plugged/unplugged with power turned on.
=Turn the camcorder’s power off and on again, then operate it.
•A malfunction of some kind has occurred. In this case the camcorder’s functions become unusable.
=Remove the power supply (battery pack, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer. Do not eject the cassette. This will cause damage to the tape.
An error indication (E03 or E04) appears.•A malfunction of some kind has occurred. In this case the camcorder’s functions become unusable.
=Eject the cassette once and
EN
TROUBLESHOOTING 31