AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when

“DEMO MODE” is set to “ON” (factory-preset).

Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch r is set to “” or “” and no cassette is in the camcorder.

Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.

“DEMO MODE” remains “ON” even if the camcorder power is turned off.

To cancel Automatic Demonstration:

1.Set the Power Switch r to “” while pressing down the Lock Button e located on the switch and press the MENU/VOLUME wheel # in. The Menu Screen appears.

2.Rotate the MENU/VOLUME wheel # to select “ (SYSTEM)” and press it.

3.Rotate the MENU/VOLUME wheel # to select “DEMO MODE” and press it. The Sub Menu appears.

4.Rotate the MENU/VOLUME wheel # to select “OFF” and press it.

5.Rotate the MENU/VOLUME wheel # to select “ RETURN”, and press it twice. The normal screen appears.

NOTE:

#

e

r

Sub Menu

SYSTEM

DEMO MODE – OFF

ON

RETURN

If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.

EN

6