GETTING STARTED EN 13

Grip Adjustment

Brightness Adjustment Of The Display

1 Adjust the velcro strip.

2 Pass your right hand through the loop and grasp the grip.

3 Adjust your thumb and fingers through the grip to easily operate the Recording Start/Stop Button, Power Switch and Power Zoom Lever. Be sure to fasten the velcro strip to your preference.

Viewfinder Adjustment

1 Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.

1 Set the Power Switch to “M” or “PLAY” while pressing down the Lock Button located on the switch.

2 Open the LCD monitor fully. ( pg. 15)

●To adjust the brightness of the viewfinder, pull out the viewfinder fully and set “PRIORITY” to “FINDER” ( pg. 27, 29).

3 Press or until the brightness control indicator on the display moves and the appropriate brightness is reached.

SET

(Up)

MENU

(Down)

BRIGHT

2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability.

3 Turn the Dioptre Adjustment Control until the indications in the viewfinder are clearly focused.

PAUSE

Dioptre Adjustment Control

Tripod Mounting

To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise.

●Some tripods are not

equipped with studs.

CAUTION:

When retracting the viewfinder, take care not to pinch your fingers.