Set the Power Switch to “PLAY”.
36 EN FEATURES FOR RECORDING
To make thumbnail images after video recording manually

1 Set “NAVIGATION” to “MANUAL”. ( pg. 27, 28) 2 Set the Power Switch to “A” or “M”.

3 After the recording, press STORE.

●The “ ” indicator appears briefly and the captured image is stored in the memory card as a thumbnail image.

NOTES:

●The remaining number of storable thumbnail images also

appears on the screen when it reaches 10 or less. If “REC

SELECT” is set to “ /” in DSC Menu, the number shows how many 640 x 480 pixel images can be stored.

●If “5S” is set to “5S” or “Anim.” in MANUAL Menu, the NAVIGATION function will not work properly.

To find scenes on tape using thumbnail images (Navigation Search)

1 Set the Power Switch to “PLAY”.

2 Press INDEX during video playback or stop mode.

6 Press SET. The NAVIGATION

NAV I GAT I ON

screen appears.

DELETE CURRENT?

7 Press or to select

 

“EXECUTE”, and press SET.

2 6 . 1 2 . 0 4 1 5 : 0 0

● Press 3 to display the previous

EXECUTE

RETURN

image. Press 5 to display the

 

next image.

 

●To cancel deletion, select “RETURN”.

●Thumbnail images cannot be deleted during video playback.

CAUTION:

Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialise it.

NOTES:

● Be sure to always use the same tape and memory card

together as they were during recording; otherwise, the

camcorder cannot recognise Tape and Memory Card IDs to

perform Navigation Function properly.

●The loaded cassette’s Navigation thumbnail image screen appears.

●Press 3 to display the previous page. Press 5 to display the next page.

3 Press or to select the desired image, and press SET.

 

NAV I GAT I ON

DATE :

2 4 . 2 5 ’ 0 4

3 : 3 : 2 9

TC :

1 3 : 2 3 : 1 5

 

1

2

3

4

5

006

● Check if an appropriate tape and memory card are loaded

when the following messages appear: “NO ID ON TAPE

OR CARD”, “UNABLE TO USE NAVIGATION”, “THIS

MEMORY CARD IS NOT COMPATIBLE”.

● If you change the memory card while shooting on one tape,

two memory cards will share the tape’s thumbnail images.

We recommend that you use one memory card for one

tape.

●The “NAVIGATION SEARCH” indication appears blinking and the camcorder starts searching the tape for the relevant point of the selected thumbnail image.

To cancel Navigation search midway

Press 4/9, 3, 5 or 8.

To add thumbnail images during video playback

1

2 Press 4/9 to start video playback.

3 Press STORE at the desired point.

●The “ ” indicator appears briefly and the image of the point where STORE is pressed is stored in the memory card as a thumbnail image.

● Navigation Search does not work if the current position is at

a blank portion on the tape. Also, do not leave a blank

portion partway through the tape when shooting; otherwise,

Navigation Function does not work properly.

● Before shooting newly over a recorded tape, be sure to

delete all thumbnail images of the previous recording from

the relevant memory card.

● If you copy thumbnail images from one memory card to

another via a PC, Navigation Search does not work with the

copied memory card.

To delete thumbnail images

1 Set the Power Switch to “PLAY”.

2 Press MENU. The Menu Screen appears.

3 Press or to select “t”, and press SET. The VIDEO Menu appears.

4 Press or to select

“NAVI.DEL.”, and press SET. The Sub Menu appears.

5 By pressing or :

Select “IMAGE SEL.” to delete the currently displayed thumbnail image.

V I DEO

SOUND MODE – STEREO NARRAT I ON – OFF SYNCHRO – ± 0 . 0

REC MODE –

COPY – OFF

NAV I . DEL .

BLANK SRCH

S / AV I NPUT – OFF

RETURN

Select “TAPE SEL.” to delete all thumbnail images for the tape which contains the currently displayed image.

Select “ALL” to delete all thumbnail images stored in the memory card at once.