JVC GR-D350AG Video Playback EN, Make sure all units are turned off, Shown in the illustration

VIDEO PLAYBACK EN 21

Connections To A TV Or VCR	1 Make sure all units are turned off.
	2 Connect the camcorder to a TV or VCR as
To S connector	shown in the illustration.
	If using a VCR, go to step 3.
	If not, go to step 4.
	3 Connect the VCR output to the TV input,
	referring to your VCR’s instruction manual.

To AV connector

S cable

Audio/Video(optional) cable

(provided)

1 2 3 4

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

6 Start playback on the camcorder. (
pg. 20)

To choose whether or not the following displays appear on the connected TV

●Date/Time

Set “DATE/TIME” to “ON” or “OFF”. (
pg. 22, 25)

●Time Code

Set “TIME CODE” to “ON” or “OFF”. (
pg. 22, 25)

●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. (
pg. 22, 25)

& PLAYBACK

TV

VCR

1Yellow to VIDEO IN (Connect when your TV/

2VCR has only A/V input connectors.)

3Red to AUDIO R IN*

4White to AUDIO L IN*

Black to S-VIDEO IN (Connect when your TV/ VCR/VCD has only A/V input connectors. In this case, it is not necessary to connect the yellow video cable.)

* Not required for watching still images only.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. (
pg. 13)

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “REC”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

VIDEO RECORDING

NOTE:

The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Centre described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camera. The core filter reduces interference.