|
|
| EDITING | EN 33 | |
| Dubbing To Or From A Video Unit |
| |||
| NOTES: | ||||
| |||||
| Equipped With A DV Connector | ● It is recommended to use the AC Adapter as | |||
| the power supply instead of the battery pack. | ||||
| (Digital Dubbing) | ● If a blank portion or disturbed image is played | |||
|
|
| ( pg. 13) | ||
|
|
| back on the player during dubbing, the dubbing | ||
It is also possible to copy recorded scenes from | |||||
the camcorder onto another video unit equipped | may stop so that an unusual image is not dubbed. | ||||
● Even though the DV cable is connected correctly, | |||||
with a DV connector. Since a digital signal is | |||||
sometimes the image may not appear in step 4. If | |||||
sent, there is little, if any, image or sound | |||||
this occurs, turn off the power and make | |||||
deterioration. | |||||
connections again. | |||||
|
|
| |||
|
|
| ● When using a DV cable, be sure to use the | ||
|
|
| optional JVC | ||
Core filter 
To DV IN/OUT
DV cable (optional)
To use this camcorder as a recorder
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.
3
4
5 Press the Recording Start/Stop Button to engage the
●The “ DV IN ” indication appears on the screen.
6 Start playback on the player.
7 At the point you want to start dubbing, press the Recording Start/Stop Button to start dubbing. The 
indication rotates.
ADVANCED FEATURES
To DV IN/OUT
Video unit equipped with DV connector
To use this camcorder as a player
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.
3 Start playback on the camcorder. ( pg. 20)
4 At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)
5 To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.
8 Press the Recording Start/Stop Button again to stop dubbing. The 
indication stops rotating.
9 Press 7 to return to the normal playback mode.
NOTE:
Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. ( pg. 23)
