24 EN MENUS FOR DETAILED ADJUSTMENT
WIND CUT
[OFF]: Disengages the function.
ON 
: Helps cut down on noise created by wind. The “
” indicator appears. The quality of the sound will change. This is normal.
SYSTEM
The “SYSTEM” functions which are set when the Power Switch is set to “REC” are also applied when the Power Switch is set to “PLAY”. [ ] =
MELODY
OFF: Even though not heard while shooting, shutter sound is recorded on the tape.
[ON]: A melody sounds when any operation is performed. It also activates the shutter sound effect. ( pg. 26)
CAM RESET
EXECUTE: Resets all settings to the factory- preset.
[RETURN]: Does not reset all settings to the
PRIORITY
[LCD]: The image is displayed on the LCD monitor when the viewfinder is pulled out while the LCD monitor is opened.
FINDER: The image is displayed in the viewfinder when the viewfinder is pulled out while the LCD monitor is opened.
DISPLAY
●The menu settings can be changed only when the Power Switch is set to “REC”.
●The “DISPLAY” settings except “BRIGHT” and “LANGUAGE” are effective only for shooting.
[ ] =
BRIGHT
☞pg. 15, “Brightness Adjustment Of The Display”
CLOCK ADJ.
☞pg. 15, “Date/Time Settings”
LANGUAGE
[ENGLISH] / / B.MELAYU / BHS.INDO The language setting can be changed.
( pg. 14)
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
ON SCREEN
LCD: Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen.
[LCD/TV]: Makes the camcorder’s display appear on screen when the camcorder is connected to a TV.
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. ( pg. 18)
DEMO MODE
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Program AE, Effects and Shutter Effects, etc., and can be used to confirm how these functions operate. Demonstration starts in the following cases:
●When the Menu Screen is closed after “DEMO MODE” is turned “ON”.
●With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes after the Power Switch is set to “REC”.
●Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
NOTES:
●If a cassette is in the camcorder, the demonstration cannot be turned on.
●“DEMO MODE” remains “ON” even if the camcorder power is turned off.
●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.
