Connecting a PC
Adjusting the PC image automatically
This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc.
Setup
Auto Sync.
NOTE
•“Auto Sync.” may fail if the PC image has low resolution, has unclear (black) edges, or is moved while executing “Auto Sync.”.
•Be sure to connect the PC to the TV and switch it on before starting “Auto Sync.”.
•“Auto Sync.” can be executed only when inputting analogue signals through the EXT 4 terminal.
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as necessary to change image position using “Auto Sync.”. In some cases, however, manual adjustment is needed to optimise the image.
Setup
Fine Sync.
1Press a/bto select the specific adjustment item.
2Press c/dto adjust the item to the desired position.
b30
b20
| Clock | [ 0] |
|
|
| b15 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Phase | [ 0] |
|
|
| b15 |
| |
|
|
|
|
|
|
|
|
|
| Item | |
Centres the image by moving it to the left or | ||
right. | ||
| ||
|
| |
Centres the image by moving it up or down. | ||
|
| |
Clock | Adjusts when the image flickers with vertical | |
stripes. | ||
| ||
|
| |
Phase | Adjusts when characters have low contrast or | |
when the image flickers. | ||
| ||
|
|
NOTE
•For resetting all adjustment items to the factory preset values, press a/bto select “Reset”, and then press ;.
•“Clock” and “Phase” in the “Fine Sync.” menu can be adjusted only when inputting analogue signals through the EXT 4 terminal.
26
