Basic adjustment
Power Save Settings
ECO
Energy Save | [Standard] |
No Signal Off | [Disable] |
No Operation Off | [Disable] |
|
|
ECO
Energy Save
This function enables you to automatically reduce the backlight brightness in order to decrease the power consumption and increase the backlight life span.
| Item | |
Off | The backlight brightness is the same value of | |
your settings in the selected “AV MODE”. | ||
| ||
|
| |
Standard | Reduces the backlight brightness by 20 %. | |
|
| |
Advanced | Reduces the backlight brightness by 30 %. |
NOTE
•This function does not work when “AV MODE” is set to “DYNAMIC (Fixed)”.
E“Energy Save” status icons
Icon | Description |
“Energy Save” is set to “Standard”.
“Energy Save” is set to “Advanced”.
ECO
No Signal Off
When set to “Enable”, the TV will automatically enter standby mode if there is no signal input for 15 minutes.
ECO
No Operation Off
The TV will automatically enter standby mode if no operations are performed during the time span you set (“30 min.” or “3 hr.”).
Channel Settings
Auto Installation
Setup
Auto Installation
The TV automatically detects and stores all available channels in your area. This function also allows you to perform the channel setting for digital and analogue individually and reconfigure the settings after the initial auto installation has been completed.
After selecting “Yes” on the screen, you can set language and channel search the same as in the initial auto installation.
NOTE
•PIN input is required when executing “Auto Installation”. The default PIN is “1234”. To change the PIN setting, refer to Password/Parental lock settings (Page 22). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 24).
•You cannot set the Home/Store setting and the country setting in “Auto Installation” in the “Setup” menu. If you want to reconfigure those settings, automatically execute initial auto installation after executing “Reset” from the “Setup” menu.
Channel detail settings
Setup
Programme Setup
You can reconfigure the DTV/ATV channel settings automatically or manually.
NOTE
•PIN input is required when executing “Programme Setup”. The default PIN is “1234”. To change the PIN setting, refer to Password/Parental lock settings (Page 22). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 24).
20
