10

Watching TV

Daily operation

Switching on/off

Turning on/off the power
Press a on the TV.
Switch it off by pressing a on the TV.
Standby mode

To standby mode

If the TV is switched on, you can switch it to standby by
pressing B on the remote control unit.

Switching on from standby

From standby, press B on the remote control unit.
TV indicator status
B (Standby/On
indicator) Status
Off Power off
Green Power on
Red Standby
NOTE
If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the AC outlet.
A small amount of electric power is still consumed even when
a is turned off.

Switching between digital and

analogue broadcasts

Watching digital
broadcasts Watching analogue
broadcasts
001 to 900 ch From 901 ch
NOTE
If the TV cannot search digital broadcasts, the analogue
broadcasts are set from 001 channel.

Changing channels

With :r/s: With 0_9:
E
E
•
•
•

Selecting an external video

source

Once the connection is made,
press b to display the “INPUT
SOURCE” screen, and then press
b or a/b to switch over to
the appropriate external source
with ;.
INPUT SOURCE
TV
EXT1
EXT2
EXT3

Selecting a sound mode

For DTV

If multi sound modes are received, each time you press
; the mode switches as follows.
Audio (ENG) : STEREO
L/R LRLR
Audio (ENG) : CH A
Audio (ENG) : CH B
Audio (ENG) : MONO
Press c/d to select L or R sound when the STEREO or
DUAL MONO screen is displayed.
Audio (ENG) : STEREO
L/R LRLR
NOTE
The sound mode screen disappears in six seconds.
Selectable items vary depending on the received broadcasts.

For ATV

Each time you press ;, the mode switches as
shown in the following tables.
NICAM TV broadcasts selection
Signal Selectable items
Stereo NICAM STEREO, MONO
Bilingual NICAM CH A, NICAM CH B, NICAM CH AB, MONO
Monaural NICAM MONO, MONO
A2 TV broadcasts selection
Signal Selectable items
Stereo STEREO, MONO
Bilingual CH A, CH B, CH AB
Monaural MONO
NOTE
When no signal is input, the sound mode will display “MONO”.
E
•
•
E
•