Sharp LC-32DH57E Other useful features, Input Label, Input Skip, Reset, Identification

Other useful features

Setting when using external devices

Input source settings

Setup

Input Label

You can label each input source with a custom description.

1Press b to select the desired input source.

2Go to “MENU” > “Setup” > “Input Label”.

3 Press a/b/c/dto select each character

of the new name for the input source, and then press ;.

			DVD
A	B	C	D	E	F	G	H	I	J CLEAR
K L M N O					P	Q	R	S	T BACK
U	V	W	X	Y	Z	+	– .		_
0	1	2	3	4	5	6	7	8	9	END

4Repeat until the label is fully spelt out.

NOTE

•The label can be six characters or less.

•When you want to set an input source label of less than six characters, select “END” to set the name.

INPUT SOURCE

TV

EXT1

DVD

EXT3

NOTE

• You cannot change labels if the input source is “TV”.

Skipping specified inputs

Setup

Input Skip

This setting allows you to set the input source you want to skip during “INPUT SOURCE” selection operations.

EXT1	[Yes]
EXT2	[No]
EXT3	[No]

Reset

Setup

Reset

If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1Go to “MENU” > “Setup” > “Reset”.

2Press c/dto select “Yes”, and then press

;.

•After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

NOTE

•PIN input is required when executing “Reset”. The default PIN is “1234”. To change the PIN setting, refer to Password/ Parental lock settings (Page 22). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 24).

Identification

Setup

Identification

You can check the TV ID on the screen for reporting to customer service.

Software update

If you use DVB-T, the TV automatically receives the update service and updates new software. When a confirmation message is received about the software update on the screen, follow the screen prompts.

CAUTION

•Do not disconnect the AC cord when the software update is in progress. If you have the problem, ask qualified service personnel.

CLEARING THE PIN

If you lose or forget your PIN, you can clear the PIN following these steps.

1Go to “MENU” > “Setup” > “Child Lock”.

2Enter the four-digit number on page 32 to clear your PIN.

NOTE

•As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach.

24