Connecting external devices

Audio connections

Speaker/amplifier connection

Connect an amplifier with external speakers as shown below.

E Connecting an amplifier with digital

E Connecting an amplifier with

audio input

analogue audio input

￿

￿

 

DIGITAL AUDIO IN

R L

R L

AUX1 IN

AUX OUT

u Optical audio cable

v Audio cable

 

EAfter connecting

Digital audio output setting

After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio output format compatible with the programme you are watching or the device connected.

Go to “MENU” > “Option” > “Digital Audio Output” > select “PCM” or “Dolby Digital”.

NOTE

When set to “Dolby Digital”, Dolby Digital is output when the Dolby Digital or Dolby Digital Plus audio formats are received. When set to “PCM”, PCM is output no matter what audio formats are received.

Some audio formats such as HE-AAC cannot be output as Dolby Digital.

Inserting the CA Card into the CI Module

1Carefully insert the CI Module in

the CI slot with the contact side forward.

2The logo on the CI Module must be facing outward from the rear of the TV.

Checking CI Module information

Go to “MENU” > “Digital Setup” > “CI Menu”.

• The content of this menu depends on the provider of the CI Module.

Module

General information on CI Module displays.

Menu

Adjustment parameters of each CA Card displays.

Enquiry

You can input numerical values such as passwords here.

NOTE

• Make sure that the CI Module is properly inserted.

15

Page 17
Image 17
Sharp LC-32DH57S, LC-32DH57E Audio connections, Speaker/amplifier connection, Inserting the CA Card into the CI Module