JVC GR-D350U manual Data Battery System, Using The Battery Pack, Maximum continuous recording time

12 EN GETTING STARTED

To detach the battery pack		Using The Battery Pack
Slide the battery pack upward while pressing
		Perform steps 2 – 3 in “Charging The Battery
PUSH BATT. to detach it.
		Pack”.
Battery pack	Charging time	Maximum continuous recording time
BN-VF707U*	Approx. 1 hr. 30 min.
BN-VF714U	Approx. 2 hrs. 40 min.	Battery pack	LCD monitor	Viewfinder on
			on
BN-VF733U	Approx. 5 hrs. 40 min.
		BN-VF707U*	1 hr. 30 min.	1 hr. 40 min.
* Provided
		BN-VF714U	3 hrs.	3 hrs.25 min.
NOTES:
		BN-VF733U	7 hrs.	8 hrs.
÷This product includes patented and other
		* Provided
proprietary technology and will operate only
with JVC Data Battery. Use the JVC BN-		NOTES:
VF707U/VF714U/VF733U battery packs. Using		÷ Recording time is reduced significantly under the
generic non-JVC batteries can cause damage		following conditions:
to the internal charging circuitry.
		● Zoom or Record-Standby mode is engaged
● If the protective cap is attached to the battery
		repeatedly.
pack, remove it first.
		● The LCD monitor is used repeatedly.
● During charging, the camcorder cannot be
		● The playback mode is engaged repeatedly.
operated.
		● Before extended use, it is recommended that you
● Charging is not possible if the wrong type of
		prepare enough battery packs to cover 3 times the
battery is used.
		planned shooting time.
● When charging the battery pack for the first time
		ATTENTION:
or after a long storage period, the POWER/
CHARGE lamp may not light. In this case, remove		Before detaching the power source, make sure that
the battery pack from the camcorder, then try		the camcorder’s power is turned off. Failure to do so
charging again.		can result in a camcorder malfunction.
● If the battery operation time remains extremely		Data Battery System
short even after having been fully charged, the
		You can check the remaining battery power and
battery is worn out and needs to be replaced.
Please purchase a new one.		the recordable time.
● Since the AC Adapter processes electricity		1) Make sure the battery is attached and the
internally, it becomes warm during use. Be sure to		Power Switch is set to “OFF”.
use it only in well-ventilated areas.		2) Open the LCD monitor fully.
● Using the optional AA-VF7 Battery Charger, you		3) Press DATA, and the battery status screen
can charge the BN-VF707U/VF714U/VF733U
		appears.
battery pack without the camcorder.
		● It is displayed for approx. 5 seconds if the
● After 5 minutes has elapsed in Record-Standby
		button is pressed and released quickly, and for
mode with the cassette inserted and no operation
		approx. 15 seconds if the button is pressed
is performed (“ PAUSE” indicator may not
		and hold for several seconds.
appear), the camcorder will automatically turn off
		● If “COMMUNICATION ERROR” appears
its power supplied from the AC adapter. In this
case, the battery charge starts if the battery is		instead of the battery status even though you
attached to the camcorder.		tried to press DATA several times, there may
		be a problem with your battery. In such a case,
		consult your nearest JVC dealer.

CONTINUED ON NEXT PAGE