GETTING STARTED
14 EN
MasterPage: Left

Power-Linked Operation

When the Power Switch is set to “REC”, you can
also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
INFORMATION:
The following explanations in this manual
supposes the use of LCD monitor in your
operation. If you want to use the viewfinder,
close the LCD monitor and pull out the
viewfinder fully.
The language on the display can be changed.
( pg. 22, 24)
1Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.
2Open the LCD monitor fully. ( pg. 18)
Set the recording mode to . ( pg. 13)
3Press MENU. The Menu Screen appears.
4Press 3 or 4 to select
“DISPLAY”, and press
SET or 2. The DISPLAY
Menu appears.
5Press 3 or 4 to select
“LANGUAGE”, and press
SET or 2.
6Press 3 or 4 to select
the desired language, and
press SET or 2.
7Press MENU. The
Menu Screen closes.
NOTE:
Press 1 whenever you want to return to the
previous menu screen.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. ( pg. 22, 24)
1Perform steps 1 – 4 in “Language Settings”
on the left column.
2Press 3 or 4 to select “CLOCK ADJ.”, and
press SET or 2. The date display format is
highlighted.
3Press 3 or 4 to select the desired date
display format, then press SET or 2. Select from
“MONTH.DATE.YEAR”, “DATE.MONTH.YEAR”
or “YEAR.MONTH.DATE”.
4Press 3 or 4 to select the time display
format, then press SET or 2. Select from “24h”
or “12h”.
5Set the year, month, date, hour and minute.
Press 3 or 4 to select the value, then press SET
or 2. Repeat this step until you have input all the
settings.
NOTE:
Press 1 to return to the previous setting.
6Press MENU.The Menu
screen closes.
1Adjust the velcro strip.
●Before making the
adjustment, remove any
security tag that may be
attached to the velcro.
2Pass your right hand
through the loop and grasp
the grip.
3Adjust your thumb and
fingers through the grip to
easily operate the
Recording Start/Stop
Button, Power Switch and Power Zoom Lever.
Be sure to fasten the velcro strip to your
preference.
Language Settings
BRIG HT
DISPLAY
LANGUAGE
DATE / TIM E
DEMO MODE
TIMECODE
ON SCREE N
CLOCK A DJ .
BRIG HT
DISPLAY
LANGUAGE ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
DATE / TIM E
DEMO MODE
TIMECODE
ON SCREE N
CLOCK ADJ.
Date/Time SettingsGrip Adjustment
CLOCKADJ .
DISPLAY
MNTH
JAN
0:00
12006
24h
..
DATE YEAR..
O
GR-D350UC.book Page 14 Wednesday, October 19, 2005 1:51 PM