JVC GR-D90, GR-D70 3, 4

USING MENUS FOR DETAILED ADJUSTMENT

For Recording Menu

This camcorder is equipped with an easy-to-use,

on-screen menu system that simplifies many of the

more detailed camcorder settings (墌 pg. 28 – 31).

1Set the Power Switch y to “ ” while pressing

down the Lock Button t located on the switch. Open

the LCD monitor fully or pull out the viewfinder fully.

2Press the MENU/VOLUME wheel % in. The Menu

Screen appears.

3Rotate the MENU/VOLUME wheel % to select the

desired function menu, and press it.

4Function menu setting depends on the function.

If you have selected “ WIPE/FADER”,

“ PROGRAM AE”, “ EXPOSURE” or

“ W. BALANCE” . . .

.....see the column on the right.

If you have selected “ CAMERA”, “ MANUAL”,

“ SYSTEM”, “ CAMERA DISPLAY” or

“ DSC” . . .

.....go to step 5.

5Rotate the MENU/VOLUME wheel % to select the

desired function and press it. The Sub Menu appears.

Then, rotate the MENU/VOLUME wheel % to select

the parameter, and press it. Selection is complete.

6Rotate the MENU/VOLUME wheel % to select

“RETURN” and press it twice. The Menu Screen

closes.

•The icon represents “END”.

NOTE:

When the Menu Screen is left on for a couple of minutes, a

residual image may be left on the screen and it may take

several seconds for the residual image to disappear. This is

not due to any defect of the unit.

WIPE/FADER

Refer to “Fade/Wipe Effects” (墌 pg. 24).

PROGRAM AE

Refer to “Program AE With Special Effects” (墌 pg. 23).

EXPOSURE

Refer to “Exposure Control” and “Iris Lock” (墌 pg. 26,

27).

W.BALANCE

Refer to “White Balance Adjustment” and “Manual

White Balance Operation” (墌 pg. 27).

CAMERA

Settings made in the “ CAMERA” Menu remain

effective whether the Power Switch y is set to “ ” or

“ ”. However, the menu settings can be changed only

when the Power Switch y is set to “ ”.

REC MODE

Allows you to set the tape recording mode ([SP] or LP)

depending on your preference (墌 pg. 10).

SOUND MODE

[12BIT]: Enables tape recording of stereo sound on

four separate channels, and is recommended for use

when performing audio dubbing. (Equivalent to the

32 kHz mode of previous models)

16BIT: Enables tape recording of stereo sound on

two separate channels. (Equivalent to the 48 kHz

mode of previous models)

ZOOM

16X: When set to “16X” while using digital zoom, the

zoom magnification will reset to 16X since digital

zoom will be disengaged.

[40X]: Allows you to use the Digital Zoom. By digitally

processing and magnifying images, zooming is

possible from 16X (the optical zoom limit), to a

maximum of 40X digital magnification.

700X: Allows you to use the Digital Zoom. By digitally

processing and magnifying images, zooming is

possible from 16X (the optical zoom limit), to a

maximum of 700X digital magnification.

SNAP MODE

Refer to “Snapshot (For Tape Recording)” (墌 pg. 25).

[ ] = Factory-preset

EC MODER–

RETURN

AGC

AIN UPG–

FULL

NAP MODES–

OOMZ–

BIT

OUND MODES–

MACER

1 GR-D90/70/30US EN 23-34 02.11.6, 3:13 PM28