JVC GR-D70, GR-D90 Connections, If using a VCR . . . go to step If not . . . go to step

Connections

These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration.

If using a VCR . . . go to step 3.

If not . . . go to step 4.

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the

To S-VIDEO )

S-Video cable (optional)

To AV (

Connector cover*

Audio/Video cable (provided)

Yellow to

VIDEO IN***

Red to

AUDIO R IN**

Menu Screen ( pg. 30, 32).

Or, press DISPLAY l on the remote control (provided with GR-D90/D70 only) to turn on/off the date indication.

•Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen ( pg. 31, 32).

•Indications other than date/time and time code

..... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in

the Menu Screen ( pg. 30, 32).

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 7).

●To monitor the picture and sound from the camcorder

without inserting a tape or memory card†, set the camcorder’s Power Switch y to “ ” or “ ”, then set your TV to the appropriate input mode.

† GR-D90/D70 only

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

●If no image is displayed or no sound is heard from the TV,

set “S/AV INPUT” to “OFF” in the Menu Screen (GR-D90/D70 only,  pg. 31).

●While the Audio/Video cable is connected to the AV connector, sound cannot be heard from the speaker.

	White to
To S-VIDEO IN	AUDIO L IN**

To TV or VCR

TV

VCR

*When connecting the cable, open this cover.

**The Audio cable is not required for watching still images only.

***Connect when an S-Video cable is not used.

EN

16 TAPE PLAYBACK