JVC GR-D90, GR-D70 For Playback Menu, Video, Clock ADJ, Quality , Image Size, REC Select

CLOCK ADJ.

Allows you to set the current date and time ( pg. 10).

DSC (GR-D90/D70 only)

	DSC
QUAL I TY		–	F I NE
I MAGE S I ZE		–	1024X768
REC SELECT –

RETURN

QUALITY , IMAGE SIZE

Refer to “Picture Quality/Image Size Setting” ( pg. 11).

REC SELECT

[ ]: When Snapshot recording is performed with the VIDEO/DSC Switch 4 set to “VIDEO”, still images are recorded only onto the tape.

/ : When Snapshot recording is performed with the VIDEO/DSC Switch 4 set to “VIDEO”, still images are recorded not only onto the tape but also on the memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in the CAMERA Menu is also applicable to memory card recording.

For Playback Menu

1 Set the VIDEO/DSC Switch 4 to “VIDEO” (GR-D90/ D70 only), then set the Power Switch y to “PLAY” while pressing down the Lock Button t located on the switch.

2 Press the MENU/VOLUME wheel % in. The Menu Screen appears.

3 Rotate the MENU/VOLUME wheel % to select the desired function menu, and press it.

4 Rotate the MENU/VOLUME wheel % to select the desired function, and press it to display the Sub Menu.

5 Rotate the MENU/VOLUME wheel % to select the desired parameter and press it. Selection is complete.

6 Rotate the MENU/VOLUME wheel % to select

“ RETURN” and press it twice to close the Menu Screen.

VIDEO

V I DEO

SOUND MODE		–	STEREO
12B I T MODE		–	SOUND 1
REC MODE		–	OF F
	COPY	–

	S / AV I NPUT – OF F
	RETURN
		........  pg. 32, “Playback Sound”.
SOUND MODE
		........  pg. 32, “Display”.
12BIT MODE

REC MODE

Allows you to set the tape recording mode ([SP] or LP) depending on your preference ( pg. 10).

It is recommended you use “REC MODE” in the

“ VIDEO” Menu when using this camcorder as a recorder during dubbing ( pg. 33, 34).

•“REC MODE” can be set when the Power Switch y is set to “PLAY” or “ ” ( pg. 10, 28).

COPY (GR-D90/D70 only)

ON: Enables dubbing of images recorded on a tape to a memory card ( pg. 21).

[OFF]: Enables snapshots to be taken during tape playback.

S/AV INPUT (GR-D90/D70 only)

ON: Enables audio/video signal input from the AV and S-VIDEO connectors ( pg. 33).

[OFF]: Enables audio/video signal output to a TV, VCR, etc. via the AV and S-VIDEO connectors ( pg. 16, 33).

•When “S/AV INPUT” is set to “ON”, camcorder playback cannot be viewed on the AV output.

SYSTEM

SYSTEM

BEEP	–	MELODY
TALLY	–	ON
REMOTE	–	ON
DEMO MODE	–	ON
PR I OR I TY	–	LCD
CAM RESET

RETURN

Each setting is linked with “ SYSTEM”, which appears when the Power Switch y is set to “ ” ( pg. 30).

The parameters are the same as in the description on pg. 30.

[ ] = Factory-preset

EN

USING MENUS FOR DETAILED ADJUSTMENT 31