JVC GR-D70 Connection To a Personal Computer, Using USB cable GR-D90/D70 only, Using DV cable

Connection To A Personal Computer

[A] Using USB cable (GR-D90/D70 only)

This camcorder can transfer still images to a PC via USB connection.

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 For GR-D90/D70 Owners: If you are using the USB connection, set the VIDEO/DSC switch 4 to “DSC”.

4 Turn the camcorder’s Power Switch y to “PLAY” while pressing down the Lock Button t located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 7).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depend- ing on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

●When using the DV connection refer to manufacturer instructions of your capture board for driver’s installation and operation instructions.

“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.

[A] Using USB cable [B] Using DV cable (GR-D90/D70 only)

y

	OFF (CHARGE)
4	PLAY

To USB 9	To DV @
OR	Core filter
USB cable	DV cable
(provided)	(optional)
	Core filter
To USB	To DV
connector	connector

PC	PC with DV
	connector

EN

SYSTEM CONNECTIONS 37