34 EN EDITING
Dubbing To Or From A VCR |
| ● As the camcorder starts to play your footage, it will appear | |
| on your TV. This will confirm the connections and the AUX | ||
|
| channel for dubbing purposes. | |
|
| ● Before you start dubbing, make sure that the indications do | |
|
| not appear on the connected TV. If they do, they are being | |
|
| recorded onto the new tape. | |
|
| To choose whether or not the following displays appear | |
|
| on the connected TV | |
|
| • Date/time | |
|
| Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. | |
|
| ( pg. 25, 28) Or, press DISPLAY on the remote control | |
|
| to turn on/off the date indication. | |
|
| • Time code | |
|
| Set “TIME CODE” to “OFF” or “ON”. ( pg. 25, 28) | |
|
| • Indications other than date/time and time code | |
To AV | To S | Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. | |
( pg. 25, 28) | |||
|
|
Audio/Video | |
cable | (optional) |
(provided) |
|
1 
2 
3 
4
TV
VCR
To use this camcorder as a recorder
1)Perform steps 1 to 3 in “To use this camcorder as a player”.
2)Set “S/AV INPUT” to “ON”. ( pg. 25, 28)
3)Set “REC MODE” to “SP” or “LP”. ( pg. 25, 26)
4)Insert the recording cassette in this camcorder.
5)Press the Recording Start/Stop Button to engage the
6)Press the Recording Start/Stop Button to start recording. The T indication rotates.
7)Press the Recording Start/Stop Button again to stop recording. The T indication stops rotating.
A White to AUDIO L IN or OUT
B Red to AUDIO R IN or OUT
C Yellow to VIDEO IN or OUT
D To
*Connect when your TV/VCR has an
NOTES:
●After dubbing, set “S/AV INPUT” back to “OFF”.
●Analog signals can be converted to digital signals with this procedure.
●It is also possible to dub from another camcorder.
To use this camcorder as a player
1 Following the illustrations, connect the camcorder and the VCR. Also refer to page 17.
2 Set the camcorder’s VIDEO/MEMORY Switch to “VIDEO”.
3 Set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
4
5
6
7
Turn on the VCR’s power.
Insert the source cassette in the camcorder.
Insert the recording cassette in the VCR.
Engage the VCR’s AUX and
●Refer to the instruction manual for the VCR.
8 Press 4/9 on the camcorder to start playback of the source tape.
9 At the point you want to start dubbing, engage the VCR’s Record mode.
10 To pause dubbing, engage the VCR’s Record- Pause mode and press 4/9 on the camcorder.
11 Repeat steps 8 – 10 for additional editing. Stop the VCR and camcorder.
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 7)
