VIDEO PLAYBACK EN 21
Connections To A TV Or VCR | 1 Make sure all units are turned off. | |
2 Connect the camcorder to a TV or VCR as | ||
| ||
| shown in the illustration. | |
| If using a VCR, go to step 3. | |
| If not, go to step 4. | |
| 3 Connect the VCR output to the TV input, | |
| referring to your VCR’s instruction manual. | |
To AV | 4 Turn on the camcorder, the VCR and the TV. | |
5 Set the VCR to its AUX input mode, and set | ||
connector | ||
| the TV to its VIDEO mode. | |
or | 6 Start playback on the camcorder. | |
| ||
| ( pg. 19) | |
| ● Please set “16:9 OUTPUT” of Playback Menus | |
Audio/Video cable | so that the image may suit your TV (16:9 TV or | |
(provided) | 4:3 TV). ( pg. 24, 25) | |
| To choose whether or not the following | |
| displays appear on the connected TV | |
| ● Date/Time | |
| Set “DATE/TIME” to “ON” or “OFF” ( pg. 25). | |
| ● Time Code | |
| Set “TIME CODE” to “ON” or “OFF” ( pg. 25). | |
TV | ● Indications other than date/time and time code | |
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV” | ||
| ||
| ( pg. 25). | |
VCR | NOTES: | |
| ● It is recommended to use the AC Adapter as | |
1Yellow to VIDEO IN (Connect when your TV/ | the power supply instead of the battery | |
VCR has only A/V input connectors.) | pack. ( pg. 13) | |
2Red to AUDIO R IN* | ● To monitor the picture and sound from the | |
3White to AUDIO L IN* | camcorder without inserting a tape or memory | |
* Not required for watching still images only. | card, set the camcorder’s Power Switch | |
| to“REC”, then set your TV to the appropriate | |
| input mode. | |
| ● Make sure you adjust the TV sound volume to its | |
| minimum level to avoid a sudden burst of sound | |
| when the camcorder is turned on. |
RECORDING & PLAYBACK