Make sure all units are turned off.
Start playback on the player.

32 EN EDITING

Dubbing To Or From A Video Unit

NOTES:

Equipped With A DV Connector

● It is recommended to use the AC Adapter as

the power supply instead of the battery

(Digital Dubbing)

pack. ( pg. 13)

● If a blank portion or disturbed image is played

It is also possible to copy recorded scenes

back on the player during dubbing, the dubbing

may stop so that an unusual image is not

from the camcorder onto another video unit

dubbed.

equipped with a DV connector. Since a digital

● Even though the DV cable is connected

signal is sent, there is little, if any, image or

correctly, sometimes the image may not appear

sound deterioration.

in step 4. If this occurs, turn off the power and

 

make connections again.

 

● If SNAPSHOT is pressed during playback, only

 

the original playback image recorded on the

 

tape is output from the DV IN/OUT connector.

 

● When using a DV cable, be sure to use the

 

optional JVC VC-VDV204U or VC-VDV206U

 

DV cable.

To DV IN/OUT

Core filter DV cable (optional)

To DV IN/OUT

Video unit equipped with DV connector

To use this camcorder as a player

1

2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

3 Start playback on the camcorder. ( pg. 19)

4 At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)

5 To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.

To use this camcorder as a recorder

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.

3 Set the camcorder’s Power Switch to “PLAY”.

4 Set “REC MODE” to “SP” or “LP”. ( pg. 25)

5

6 Press the Recording Start/Stop Button to engage the Record-Pause mode.

•The “ DV IN ” indication appears on the screen.

7 At the point you want to start dubbing, press the Recording Start/Stop Button to start

dubbing. The indication rotates.

8 Press the Recording Start/Stop Button

again to stop dubbing. The indication stops rotating.

9 Press 7 to return to the normal playback mode.

NOTE:

Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. ( pg. 24)

COPY PROTECTED

Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.