26 EN FEATURES FOR RECORDING

LED Light

 

Snapshot (Record Still Image On

LED Light can be used to

 

Tape)

 

brighten the subject in the dark

This feature lets you record still images that

place during video recording.

look like photographs onto a tape.

 

 

LIGHT

 

1 Set the Power Switch to “REC”.

 

LED Light

2 Press SNAPSHOT.

 

● The “PHOTO” indication appears and a still image

1 Press LIGHT repeatedly to change the

will be recorded for approx. 5 seconds, then the

camcorder re-enters the Record-Standby mode.

setting.

 

 

● You can perform Snapshot also during

The light is on always. ( appears.)

recording. A still image will be recorded for

 

 

approx. 5 seconds, then the normal recording

The light turns on automatically

resumes.

 

when dark. (

appears.)

● If the image taken by snapshot is too dark or too

 

 

bright, select

( pg. 28) or “SPOTLIGHT”

Turns off the light.

 

( pg. 30).

 

 

 

 

2 Press the Recording Start/Stop Button to

Motor Drive Mode

start video recording or SNAPSHOT to shoot a

Keeping SNAPSHOT pressed in step 2

still image.

 

provides an effect similar to serial photography.

NOTES:

 

(Interval between still images: approx. 1

 

 

 

● Be careful not to point the LED Light directly to

second)

 

eyes.

 

● If the light does not reach the subject when the

 

LED Light setting is “ON”, the Night-Alive

 

function will be activated, and makes it possible

 

to shoot the subject brighter.

 

● Since subjects are shot at a reduced shutter

 

speed when the LED Light setting is “ON”, they

 

will appear slightly blurred.