MENUS FOR DETAILED ADJUSTMENT EN 25

 

 

DISPLAY

 

CAM RESET

[CANCEL]: Does not reset all settings to the factory-preset.

EXECUTE: Resets all settings to the factory- preset.

Playback Menus

VTR

The settings below are effective only for video playback except “REC MODE”. The parameters (except “SOUND L/R” and “NARRATION” settings) are the same as in the description on page 24.

SOUND L/R and NARRATION

During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the sound to accompany your playback picture.

REC MODE

[SP]* / LP

Allows you to set the video recording mode (SP or LP) depending on your preference. It is recommended you use “REC MODE” in VIDEO Menu when using this camcorder as a recorder during dubbing. ( pg. 31, 32)

* SP indicator does not appear on the screen.

NARRATION

Although it is not possible to perform audio dubbing with this camcorder, you can hear sound from an audio-dubbed tape during playback using this function.

[OFF]: Original sound is output on both “L” and “R” channels in stereo.

ON: Dubbed sound is output on both “L” and “R” channels in stereo.

MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.

SOUND L/R

[STEREO ]: Sound is output on both “L” and “R” channels in stereo.

SOUND L : Sound from the “L” channel is output.

SOUND R : Sound from the “R” channel is output.

Each setting (except “OFF” in “ON SCREEN”, “DATE/TIME” and “TIME CODE”) is linked with “DISPLAY”, which appears when the Power Switch is set to “REC”.

The parameters (except “OFF” in “ON SCREEN” setting) are the same as in the description on  pg. 24.

ON SCREEN

OFF / [LCD] / LCD/TV

When set to “OFF”, the camcorder’s display disappears.

DATE/TIME

[OFF] / ON

CLOCK ADJ.

pg. 14, “Date/Time Settings”

TIME CODE

[OFF] / ON

pg. 18, “Time Code”

16:9 OUTPUT

4:3 TV / [16:9 TV]

pg. 24, “16:9 OUTPUT”

BRIGHT

pg. 14, “Brightness Adjustment Of The Display”

SYSTEM

Each setting (except “DEMO MODE”) is linked with “SYSTEM”, which appears when the Power Switch is set to “REC”.

The parameters are the same as in the description on page 24.

ADVANCED FEATURES