If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.
| Problem |
| Possible Cause | Remedy | ||||
Recording cannot be | • | The tape’s erase protection tab is | Set the tape’s erase protection tab | |||||
performed. |
| set to “SAVE”. | to “REC” ( 13). | |||||
|
|
|
|
|
| • | “TAPE END” appears. | Replace with new cassette ( 13). |
|
|
|
|
|
| • The cassette holder cover is open. | Close the cassette holder cover. | |
When shooting a | • | This is not a malfunction. |
| |||||
subject illuminated by |
|
|
| |||||
bright light, vertical |
|
|
| |||||
lines appear. |
|
|
| |||||
When the screen is | • | This is not a malfunction. |
| |||||
under direct sunlight |
|
|
| |||||
during shooting, the |
|
|
| |||||
screen becomes red or |
|
|
| |||||
black for an instant. |
|
|
| |||||
The focus does not | • | Focus is set to the Manual mode. | Set Focus to the Auto mode ( 24). | |||||
adjust automatically. | • | The lens is dirty or covered with | Clean the lens and check the | |||||
|
|
|
|
|
|
| condensation. | focus again ( 24). |
The image looks like | • | When shooting in the dark, the | If you want the lighting to look | |||||
the shutter speed is |
| unit becomes highly sensitive to | more natural, set “GAIN UP” to | |||||
too slow. |
| light when “GAIN UP” is set to | “AGC” or “OFF” ( 20). | |||||
|
|
|
|
|
|
| “AUTO”. |
|
Images on the LCD | • | In places subject to low | Adjust the brightness and angle of | |||||
monitor appear dark or |
| temperature, images become | the LCD monitor | |||||
whitish. |
| dark due to the characteristics | ( 8, 13). | |||||
|
|
|
|
|
|
| of the LCD monitor. This is not a |
|
|
|
|
|
|
|
| malfunction. |
|
Picture does not | • | The LCD monitor’s brightness | Adjust the brightness of the LCD | |||||
appear on the LCD |
| setting is too dark. | monitor ( 13). | |||||
monitor. |
|
|
| |||||
Aspect ratio is strange. |
|
| If the aspect ratio of the video you | |||||
|
|
|
|
|
|
|
| are playing is strange, change the |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| setting in “16:9 OUTPUT” |
|
|
|
|
|
|
|
| ( 21, 23). |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
No power is supplied. | • | The power is not connected | Connect the AC Adapter securely. | |||||
|
|
|
|
|
|
| properly. | ( 11) |
|
|
|
|
|
| • The battery pack is not attached | Detach the battery pack once | |
|
|
|
|
|
|
| fi rmly. | again and |
|
|
|
|
|
| • The battery is dead. | Replace the dead battery with a | |
|
|
|
|
|
|
|
| fully charged one. ( 11) |
The POWER/CHARGE | • | Charging is diffi cult in places | To protect the battery, it is | |||||
lamp on the camcorder |
| subject to extremely high/low | recommended to charge it in | |||||
does not light during |
| temperatures. | places with a temperature of 10°C | |||||
charging. |
|
| to 35°C (50°F to 95°F). ( 33) | |||||
|
|
|
|
|
| • The battery pack is not attached | Detach the battery pack once | |
|
|
|
|
|
|
| fi rmly. | again and |
|
|
|
|
|
|
|
| ( 11) |
ENGLISH