10 EN GETTING STARTED

 

Provided Accessories

How To Attach The Lens Cap

 

To protect the lens, attach

 

the provided lens cap to the

 

camcorder as shown in the

 

illustration.

 

NOTE:

 

To confirm the lens cap is on

 

correctly make sure the cap is

 

flush to the camcorder.

aAC Adapter AP-V14E

bPower Cord

cBattery Pack BN-VF707U

dAV Cable

eAudio Extension Cable (for optional microphone,  pg. 11 for connection)

fCore Filter [small] x 2 (for Audio extension cable  pg. 11 for attachment)

gCore Filter (for AV cable  pg. 11 for attachment)

hCable Adapter

iRemote Control Unit RM-V720U

jLithium Battery CR2025* (for remote control unit)

kShoulder Strap (see the right column for attachment)

lLens Cap (see the right column for

attachment)

*A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.

NOTES:

In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

Make sure to use the provided cables for connections. Do not use any other cables.

Place here during shooting.

How To Attach The Shoulder Strap

Follow the illustration.

1 Thread the strap through the eyelet.

2 Fold it back and thread it through the strap guide and the buckle.

To adjust the length of the strap, loosen and then tighten the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

Buckle

Strap guide

2

Eyelet

1

3