38 EN EDITING

Dubbing To A VCR

Open the cover.

To S connector

 

To AV connector

S cable

AV cable

(optional)

(provided)

1 2 3 4

Cable

“Y/C”/“CVBS”Adapter*

Video Out Select

Switch

TV

To VCR

1 Following the illustrations, connect the camcorder and the VCR’s input connectors.

2 Start playback on the camcorder. ( pg. 20)

3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)

●To choose whether or not the following displays appear on the connected TV

•Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 25, 30)

Or, press DISPLAY on the remote control to turn on/off the date indication.

•Time code

Set “TIME CODE” to “OFF” or “ON”. ( pg. 25, 30)

•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/ TV”. ( pg. 25, 30)

VCR

ATo S-VIDEO IN**

BYellow to VIDEO IN

CRed to AUDIO R IN

DWhite to AUDIO L IN

*If your VCR has a SCART connector, use the provided cable adapter.

**Connect when your TV/VCR has an S-VIDEO IN connector. In this case, it is not necessary to connect the yellow video cable.

NOTES:

●Set the video out select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable. CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/ video cable.

●The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.