To stop playback, press 8.
Load a cassette. ( pg. 16)
8/

20 EN VIDEO PLAYBACK

Normal Playback

MENU

Power Switch

4/9/

VOL. +/–

Lock Button

3

5

Speaker

 

 

 

1

2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

3 To start playback, press 4/9.

4

●During Stop mode, press 3 to rewind, or 5 to fast-forward the tape.

To control the speaker volume

Slide the Power Zoom Lever (VOL. +/–) towards “+” to turn up the volume, or towards “–”to turn down the volume.

NOTES:

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV.

( pg. 21)

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

Still Playback

Pauses during video playback.

1)Press 4/9 during playback.

2)To resume normal playback, press 4/9 again.

● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.

Shuttle Search

Allows high-speed search in either direction during video playback.

1)During playback, press 5 for forward search, or 3 for reverse search.

2)To resume normal playback, press 4/9.

●During playback, press and hold 5or 3. The search continues as long as you hold the button. Once you release the button, normal playback resumes.

●A slight mosaic effect appears on the display during Shuttle Search. This is not a malfunction.

ATTENTION:

During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.