| FEATURES FOR RECORDING EN 51 | |
CAUTION: | Biphonic Recording | |
Do not remove the memory card or perform any |
| |
other operation (such as turning off the camcorder) | For Biphonic Playback ( pg. 24), perform the | |
during deletion. Also, be sure to use the provided | following procedure. | |
AC Adapter, as the memory card may be corrupted | ||
| ||
if the battery becomes exhausted during deletion. If | Mic for Biphonic | |
the memory card becomes corrupted, initialise it. | ||
(provided) | ||
NOTES: | ||
|
●Be sure to always use the same tape and memory
card together as they were during recording; otherwise, the camcorder cannot recognise Tape and Memory Card IDs to perform Navigation
Function properly. | Core filter (provided) |
|
● Check if an appropriate tape and memory card |
|
|
are loaded when the following messages appear: | Audio extension cable |
|
“UNABLE TO USE NAVIGATION”, “THIS |
| |
(provided) |
| |
MEMORY CARD IS NOT COMPATIBLE”. |
| |
|
| |
● If you change the memory card while shooting on |
|
|
one tape, two memory cards will share the tape’s | To MIC connector |
|
thumbnail images. We recommend that you use |
| |
one memory card for one tape. |
|
|
● Navigation Search does not work if the current |
|
|
position is at a blank portion on the tape. Also, do |
|
|
not leave a blank portion partway through the tape | Open the cover. |
|
when shooting; otherwise, Navigation Function |
| |
|
| |
does not work properly. | 1 Connect the Mic for Biphonic to the MIC |
|
● Before shooting newly over a recorded tape, be |
| |
sure to delete all thumbnail images of the previous |
| |
recording from the relevant memory card. | connector and put them on to your ears. |
|
2 Perform steps 1 – 4 in “Basic Recording” |
| |
● If you copy thumbnail images from one memory | FEATURES | |
card to another via a PC, Navigation Search does | ( pg. 19). | |
not work with the copied memory card. | 3 Set “AUX MIC” to “BIPHONIC”. | |
| ||
| ( pg. 38, 40) | |
| ● “ ” appears on the display. | |
| ADVANCED | |
| 4 To start recording, press the Recording Start/ | |
| Stop Button. | |
| NOTES: | |
| ● When you put on Mic for Biphonic, never confuse | |
|
|
left and right channel of it. ● During Biphonic
recording, be sure to
turn your face toward the shooting subject along with the camcorder. Otherwise the sound does not correspond with the
footage.
● Some noises may be picked up when you
touch the Mic for Biphonic during recording.
● Be sure to set “AUX MIC” to “NORMAL” when you use a microphone other than the Mic for Biphonic.
