JVC GR-DF473, GR-DF573 instruction manual Audio Dubbing, To hear the dubbed sound during playback

			EDITING EN 55
● The system may not work properly depending on			To hear the dubbed sound during playback
the PC or capture board you are using.			Set “NARRATION” to “ON” or “MIX”.
“USB” appears on the LCD monitor while the			( pg. 37, 41)
			NOTES:
PC is accessing data in the camcorder or the
camcorder is transferring a file to the PC.			● Sound is not heard from the speaker during Audio
NEVER disconnect the USB cable while			Dubbing.
“USB” is displayed on the LCD monitor			● When editing onto a tape that was recorded at
since this can result in product damage.			12-BIT, the old and new soundtracks are recorded
			separately.
Audio Dubbing			● If you dub onto a blank space on the tape, the
			sound may be disrupted. Make sure you only edit
			recorded areas.
The audio track can be customised only when			● If feedback or howling occurs during TV playback,
recorded in the 12-BIT and SP modes.			move the camcorder’s microphone away from the
( pg. 38)			TV, or turn down the TV’s volume.
● Use the provided remote control.			● If you change from 12-BIT to 16-BIT in mid-
			recording and then use the tape for Audio
	Microphone Connector
			Dubbing, it is not effective from the point where
			16-BIT recording began.
			● During Audio Dubbing, when the tape moves to
			scenes recorded in the LP mode, scenes
			recorded in 16-BIT audio or a blank portion, Audio
			Dubbing stops.
	Speaker		● Audio dubbing is also possible using an optional
			microphone connected to the MIC connector.
			● While an optional microphone is connected, the
	START/		built-in microphone is disabled.
	STOP	Stereo Microphone	● To perform Audio Dubbing with a video unit
	PAUSE
REW			connected to the camcorder’s AV connector, first
	PLAY		set “S/AV INPUT” to “ON” in VIDEO Menu.
INSERT	STOP		( pg. 37, 42)
	A.DUB		The “AUX” indication appears instead of “MIC”.

1 Play back the tape to locate the point where editing will start, then press PAUSE (9).

2 While holding A. DUB (D) on the remote control, press PAUSE (9). The “9D” and “MIC” indicators appear.

3 Press PLAY (U), then begin “narrating”. Speak into the microphone.

●To pause dubbing, press PAUSE (9).

4 To end Audio Dubbing, press PAUSE (9), then STOP (8).

ADVANCED FEATURES