Dubbing To Or From A Video Unit
Equipped With A DV Connector
(Digital Dubbing)
It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.
To DV IN/OUT
Core filter | DV cable (optional) |
To DV IN/OUT
Video unit equipped with DV connector
EDITING EN 53
To use this camcorder as a player
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.
3 Start playback on the camcorder. ( pg. 22)
4 At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)
5 To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.
NOTES:
● It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 15)
● If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.
● Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.
● If “Playback Zoom”( pg. 27) or “Playback Special Effects” ( pg. 27) is attempted or SNAPSHOT is pressed during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.
● When using a DV cable, be sure to use the
optional JVC | FEATURES | |||
To use this camcorder as a recorder | ||||
1 Make sure all units are turned off. | ||||
ADVANCED | ||||
2 Connect this camcorder to a video unit | ||||
equipped with a DV output connector using a DV | ||||
cable as shown in the illustration. | ||||
3 Set the camcorder’s Power Switch to “PLAY”. | ||||
| ||||
4 Set “REC MODE” to “SP” or “LP”.pg(. 42) |
| |||
5 Press the Recording Start/Stop Button to |
| |||
engage the |
| |||
● The |
| ” indication appears on the screen. |
| |
DV IN |
| |||
6 Start | playback on the player. |
| ||
7 At the point you want to start dubbing, press |
| |||
the Recording Start/Stop Button to start |
| |||
dubbing. The | indication rotates. |
| ||
8 Press the Recording Start/Stop Button again
to stop dubbing. The 
indication stops rotating.
9 Press 8 to return to the normal playback mode.
CONTINUED ON NEXT PAGE
