EN 11
ATTENTION: | About Batteries | |
Before detaching the power source, make sure |
| |
that the camcorder’s power is turned off. Failure to |
| |
do so can result in a camcorder malfunction. |
| |
INFORMATION: |
| |
The optional |
| |
composed of a battery pack and AC Power Adapter/ |
| |
Charger: | ||
| ||
V15EG or |
| |
| ||
V80EG or |
| |
Read the kit’s instruction manual before using. |
| |
Also, by using the optional JVC |
| |
Cord, it will be possible to connect |
| |
| ||
supply power directly to the camcorder. | DANGER! Do not attempt to take the batteries apart, | |
| ||
NOTE: | or expose them to flame or excessive heat, as it may | |
It is not possible to use the optional | cause a fire or explosion. | |
Light, | WARNING! Do not allow the battery or its terminals | |
Microphone or | to come in contact with metals, as this can result in | |
a short circuit and possibly start a fire. | ||
Using AC Power | The Benefits Of | |
| power capacity. However, when one is exposed to | |
| cold temperatures (below 10°C), its usage time | |
| becomes shorter and it may cease to function. If this | |
| happens, place the battery pack in your pocket or | |
AC Adapter | other warm, protected place for a short time, then | |
| ||
Open the cover. | pack itself is not cold, it should not affect | |
performance. | ||
| ||
| (If you’re using a heating pad, make sure the battery | |
To DC connector | pack does not come in direct contact with it.) | |
For other notes, pg. 64. | ||
Power Cord | ||
|
To AC outlet
1Connect the AC Adapter to the camcorder a, then connect the Power Cord to the AC Adapter b.
2Plug the AC Adapter into an AC outlet c.
NOTES:
●The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V.
●For other notes, pg. 64.