50 EN

DUBBING

Dubbing To Or From A VCR

NOTE:

Dubbing from a VCR is possible with GR-DV700/ 500 only.

Connector Cover***

Connector

To S

Cover***

 

To AV

Audio/Video

cable

(provided)S-Video cable (optional)

1 2 3 4

Cable Adapter*

“Y/C”/“CVBS” VideoOut Select Switch

TV

VCR

AWhite to AUDIO L IN or OUTBRed to AUDIO R IN or OUTCYellow to VIDEO IN or OUTDTo S-VIDEO** IN or OUT

*If your VCR has a SCART connector, use the provided cable adapter.

**Connect when your TV/VCR has an S-VIDEO IN/OUT connector. In this case, it is not necessary to connect the yellow video cable.

***When connecting the cable, open the cover.

NOTE:

Set the video out select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

To use this camcorder as a player...

1Following the illustrations, connect the camcorder and the VCR. Also refer to page 22.

2Set the camcorder’s VIDEO/MEMORY Switch to “VIDEO”.

3Set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

4Turn on the VCR’s power.

5Insert the source cassette in the camcorder.

6Insert the recording cassette in the VCR.

7Engage the VCR’s AUX and Record-Pause modes. ● Refer to the instruction manual for the VCR.

8Press 4/9on the camcorder to start playback of the source tape.

9At the point you want to start dubbing, engage the VCR’s Record mode.

10To pause dubbing, engage the VCR’s Record- Pause mode and press 4/9 on the camcorder.

11Repeat steps 8 – 10 for additional editing. Stop the VCR and camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack.

( pg. 11)

●As the camcorder starts to play your footage, it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV...

•Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 31, 40) Or, press DISPLAY on the remote control to turn on/off the date indication.

•Time code

Set “TIME CODE” to “OFF” or “ON”. ( pg. 31, 40)

•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/ TV”. ( pg. 31, 40)

To use this camcorder as a recorder...(GR-DV700/500 only)

1)Perform steps 1 to 3 in the left column.

2)Set “S/AV INPUT” to “ON”. ( pg. 31, 39)

3)Set “REC MODE” to “SP” or “LP”. ( pg. 31, 34)

4)Insert the recording cassette in this camcorder.

5)Press the Recording Start/Stop Button to engage the Record-Pause mode. The “ A/V.IN ” indication appears on the screen.

6)Press the Recording Start/Stop Button to start

recording. The indication rotates.