Keeping SNAPSHOT pressed in step 5 provides an effect similar to serial photography. (Interval between still images: approx. 1 second)
●The Motor Drive mode is disabled when “REC
SELECT” is set to “/”. ( pg. 38)
SNAPSHOT Button
MENU Wheel
FOCUS ButtonLock Button
Power Switch
Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture.
1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.
2Open the LCD monitor fully, or pull out the viewfinder fully.
●You can tilt the LCD monitor upward to 180° so that it faces forward and view yourself while
Stops blinking and stays on
OR
Turns off
After approx. 15 sec.
3Set
4To engage the
●After 15 seconds, the beep sounds and video recording starts.
5To stop
●The camcorder
OR
MANUAL
SELF – T I MER – OFF
ON
RETURN
5Press SNAPSHOT.
●After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder
6To end