Whirlpool GDP8500 warranty When cycle is finished, Electrical connection, Converting to built-in

When cycle is finished

1.Turn hot water off. (This can be done after the last rinse.)

2.Press the red button on the connector to release the water pressure

3.Lift slightly on the hose connector while pulling down the locking collar. Pull down on the connector

4.Empty any remaining water from the connector by turning the connector upsidedown.

5.Unplug power supply cord and return to storage compartment.

6.Return hoses to storage compartment.

Electrical connection

A power supply of 120 volts, 50160 Hz AC, 15 or 20 amps, is required. For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard it must be plugged into a mating 3-prong grounding type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

Sprang grounding

PQI

1

e

Power supply

Locking collar

Hose connection

Personal Injury Hazard

An extension cord should not be used with this appliance.

Such use may result in a fire, electrical shock or other personal injury.

Do not, under any circumstances, remove the power supply cord ground prong.

Converting to built-in

Your Whirlpool Portable Dishwasher can be converted to a built-in (undercounter) model by using conversion kit No. 4317856. The kit is available at your Whirlpool dealer or authorized Whirlpool@ service company. Instructions are included with the kit.

19