Whirlpool GDP8500 warranty Problem, Cause, Solution

Problem

Spotting and Filming (continued)

Cycle Takes

Extremely Long

Time

Dishes Do Not Dry Completely

Silica Film or Etching (Silica Film is a White Irides- cent Deposit; Etching is a Cloudy Film)

Black or Gray Marks on Dishes

Cause

Water temperature is too low

Use of incorrect detergents

Incorrect amount of detergent

Use of ineffective detergents

Insufficient fill caused by low water pressure

Water temperature is too low

Dishes do not drain PropeN

Plastics

A water chemical reaction with certain types of glassware. Usually caused by some combination of soft or softened water, alkaline washing solutions, insuffiiient rinsing, over-loading the dishwasher, and heat of drying.

Aluminum items

Solution

Use the Hi-Temp Wash option. If needed turn home water heater up to ensure water entering dishwasher is 120°F (49°C). minimum. See recommended procedure on page 13.

Use recornrnended dishwasher deter- gents onfy.

Follow recommendations on page 11 for amount. Heavy soil and/or hard water generally require extra detergent.

Detergent should be fresh. Store in a cool, dry place, preferably in an airtight container. Discard lumpy detergent.

Home water pressure should be 20 to 120 psi for proper dishwasher fill. A booster pump on the water supply may be necessary if pressure is too low.

If needed, turn home water heater up to ensure water entering dishwasher is 120°F (49°C) minimum. See recom- mended procedure on page 13.

Dishes must have proper- water drainage Do not overload. Follow instructions for loading dishwasher on pages 15-l 7. Use a liquid rinse agent to speed draining.

Some plastics, due to material, may need to be towel dried.

It may not be possible to prevent prob- lem, except by hand-washing. To retard this process, use a minimum amount of detergent but not less than one table- spoon per load. Use a liquid rinse agent and underload the dishwasher to allow thorough rinsing. Silica film and etching are permanent and can not be removed. Use the Air Dry option.

Aluminum items should be loaded so that they will not rub against dishes during washing. Throw-away aluminum items should not be washed in the dishwasher because they may break down and cause marking. Aluminum markings can be removed by using a mild abrasive cleanser.

22