Press E-MAILto engage the E-Mail Clip Record- Standby mode.
● “E-CLIP” appears.
● To cancel E-Mail Clip Recording, press E-MAILagain or press 8 to stop video playback.
E-Mail Clip Recording

You can make video clips in 160 x 120 pixels from real-time camera image or recorded video footage and store them in a memory card as files which can be conveniently sent via E-Mail.

Power Switch

Lock Button

Recording Start/Stop Button

Stop (8) Button

To make video clips from real-time camera image

1Load a memory card. ( pg. 16)

2Set the VIDEO/MEMORY Switch to “MEMORY”.

3Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.

4Press E-MAILto engage the E-Mail Clip Record- Standby mode.

●“E-CLIP” appears.

5Press the Recording Start/Stop Button to start recording.

6Press the Recording Start/Stop Button to stop recording.

●“COMPLETED” is displayed, then the camcorder re-enters the E-Mail Clip Record- Standby mode.

7Press E-MAILto end E-Mail Clip Recording. The normal screen reappears.

To view video clips stored in a memory card…

Refer to “Playback Of Video Clips” ( pg. 25).

To delete unwanted video clips stored in a memory card…

VIDEO/MEMORY Switch

160

E-CLIP

0h2

5m

 

 

00 :

00

 

 

STANDBY

160

E-CLIP

0h1: 10m

 

 

00 : 1

5

 

 

REC

 

160

E-CLIP

0h0

0m

 

 

00 :

00

 

 

COMPLETED

E-MAIL Button

Play/Pause Button (4/9)

Remaining time

Shooting starts when the Recording Start/ Stop Button is pressed.

Shooting stops when the Recording Start/Stop Button is pressed again.

Refer to “Deleting Files” ( pg. 28).

Approximate recording time

 

 

MultiMediaCard

 

 

 

 

8

MB**

 

7 min.

 

 

 

 

8

MB*

 

8 min.

 

 

 

16 MB*

 

17 min.

 

 

 

 

*Optional

**Provided (9 title images pre-stored)

NOTE:

It is not possible to adjust the speaker and headphone volume during E-Mail Clip Recording mode.

To make video clips from recorded video footage

1

Load a cassette. ( pg. 15)

2

Load a memory card. ( pg. 16)

Recording is complete.

3

Set the VIDEO/MEMORY Switch to “VIDEO”.

4

Set the Power Switch to “PLAY” while pressing

 

down the Lock Button located on the switch.

5 Press 4/9 to start video playback.

6