| EN 63 | |
Using The Camcorder As A | 1 Make sure all necessary software (provided) are | |
installed in your PC and all units are turned off. | ||
WebCam | 2 Connect the camcorder to your PC using the USB | |
| cable. | |
This camcorder can be used as a WebCam via USB | 3 Set the VIDEO/MEMORY Switch to “MEMORY”. | |
connection. | 4 Set the Power Switch to “A” or “M” while | |
| pressing down the Lock Button located on the | |
| switch. | |
| 5 Turn on the PC. | |
| ● “ ” appears on the screen. | |
| ● If the PC is not powered on, the camcorder | |
| does not enter the Web Camera mode. | |
| 6 When finished, turn off the PC first, then the | |
| camcorder. Disconnect the USB cable from the | |
| camcorder and PC. | |
To USB | NOTES: | |
● It is recommended to use the AC Adapter as the | ||
| ||
| power supply instead of the battery pack. | |
| ||
| ● Use the provided software PIXELA ImageMixer to | |
USB cable | capture video in real time. | |
● You can also use the camcorder for web | ||
(provided) | conference by using Microsoft Windows® | |
| NetMeeting® and signing up for MSN Hotmail. | |
| ● In the Web Camera mode, the following buttons | |
| cannot be operated: TITLE, | |
| INDEX, NAVI, NAVI STORE, the Recording Start/ | |
| Stop Button. | |
To USB connector | Refer to the instruction manuals of the PC and | |
provided Software. |