20 EN | VIDEO PLAYBACK |
Normal PlaybackMENU Wheel (VOLUME)Power Switch
Lock Button
VIDEO/MEMORY Switch
Stop Button (8)Play/Pause Button (4/9)Rewind Button (3)| Speaker | |
|
1Load a cassette. ( pg. 15)
2Set the VIDEO/MEMORY Switch to “VIDEO”.
3Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
4To start playback, press 4/9.
5To stop playback, press 8.
●During Stop mode, press 3 to rewind, or 5 to
NOTES:
●Clean the video heads using an optional dry cleaning cassette when:
•No picture during playback.
•Blocks of noise appear during playback. For details, pg. 75.
●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV.
●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camcorder body.
●LCD monitor/viewfinder indications:
•When power is supplied from a battery: the
“
” battery indicator is displayed. ( pg. 84)
•When power is supplied from an AC outlet: the
“
” battery indicator does not appear.
●When a cable is connected to the AV connector, the sound is not heard from the speaker.
To control the speaker volume…Rotate the MENU Wheel towards “+” to turn up the volume, or towards
Pauses during video playback.
1)Press 4/9 during playback.
2)To resume normal playback, press 4/9 again.
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.
●When 4/9 is pressed, the image may not pause immediately while the camcorder stabilizes the still image.