56 EN

USING THE REMOTE CONTROL UNIT

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. ( pg. 58)

For GR-DV800/500 owners:

If you want to perform Random Assemble Editing ( pg. 60 – 65), use the optional RM-V700U remote control.

Installing The BatteriesRM-V717U (provided with GR-DV900 only)

The remote control uses two “AAA (R03)” size batteries. Refer to “General Battery Precautions (GR-DV900 only)” ( pg. 74).

1Remove the battery compartment cover while pushing up the tab as illustrated.

2Insert two “AAA (R03)” size batteries in the correct direction.

3Re-attach the battery compartment cover.

Installing The BatteryRM-V700U (optional)

The remote control uses one lithium battery (CR2025).

1There are 2 ways to pull the battery holder out of the RM-V700U.

A Pull out the battery holder while sliding the lock hole.

B Pinch the release tab and pull out the battery holder.

2Insert the battery in the holder, and be sure to have the “+” mark visible.

3Slide the holder back in until you hear a click.

1

Lock hole

1

3 Tab2 +

– +

–

Knob
Insert the minus (–) end first.Install The BatteryRM-V718U (provided with GR-DV800/500 only)

The remote control uses one lithium battery (CR2025).

1Pull out the battery holder by inserting a pointed instrument into the slot.

2Insert the battery in the holder, and be sure to have the “+” mark visible.

3Slide the holder back in until you hear a click.

2

3

1

Slot

 

Beam Effective Area (indoor use)

When using the

 

remote control, be

 

sure to point it at the

 

remote sensor. The

 

transmitted beam’s

 

approximate effective

Remote sensor

distance for indoor

use is 5 m (16 ft).

 

NOTE:

The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.

1