EN 43
engaged, certain modes of Program AE with | ||||
special effects are disabled during Snapshot | ||||
recording. In such a case, the icon blinks. | ||||
● If SNAPSHOT is pressed when “DIS” is set to | ||||
● During playback as well, all snapshot modes | ||||
except Nega mode are available when | ||||
“ |
|
|
| COPY” is set to “OFF” in VIDEO Menu. |
|
|
| ||
heard. |
|
| ||
● During Snapshot recording, the image displayed | ||||
in the viewfinder may be partially missing. | ||||
However, there is no effect in the recorded image. | ||||
● When a cable is connected to the AV connector, |
Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture.
1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.
2Open the LCD monitor fully, or pull out the viewfinder fully.
●You can tilt the LCD monitor upward to 180° so that it faces forward and view yourself while
the shutter sound is not heard from the speaker, |
however it is recorded onto the tape. |
Keeping SNAPSHOT pressed in step 5 provides an effect similar to serial photography. (Interval between still images: approx. 1 second)
●The Motor Drive mode is disabled when “REC
SELECT” is set to “/”. ( pg. 39)
3Set
4To engage the
●After 15 seconds, the beep sounds and video recording starts.
5To stop
●The camcorder
OR
MANUAL
SELF – T I MER – OF F
ON
RETURN
5Press SNAPSHOT.
●After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder
6To end
CONTINUED ON NEXT PAGE